Shims are thin, steel or aluminum plates used to make up for irregularities in the machining of parts. They are also used to level, align and adjust the height of the table on a milling machine. {0}They are inserted between two surfaces, one of which is slightly lower than the other.{1} In this case, a shim was cut from a piece of sheet metal to make up for a slight height difference between the top and bottom of the milling machine’s table. Precut shims are available in various thicknesses and widths. For example, the model number G-680R2F3B is a ready-cut shim with a 3/8-inch (0.95 cm) thickness and 2 inches (5.1 cm) of width. Sachin Shims Ready Cut Shims have been used for Shaft alignment of rotating gear such as motor pump, fans, blowers, turbine, compressor, dies tampers, punch press, gear box and journal boxes in steel mills, refineries, chemicals plant, paper mills, power plant and have facilities. We at Sachin Shims manufacture ready cut shims with help of die punch proces...
